惠普 Pavilion dv2623

marvell网卡驱动 hp drivers dv2623tx dv200
品牌	HP
CPU类型	Intel Core2 Duo T7250 FSB 800MHz
内存类型	DDR2
内存大小	1024MB
笔记本主频	2000 MHz
迅驰技术	迅驰4
系统总线频率	667MHz
硬盘描述	SATA 5400RPM
光驱描述	内置支持光雕(LightScribe)和双层刻录技术的 Super Multi DVD+/-RW
标准分辨率	1280×800
独立显卡	支持
无线网卡	802.11 a/b/g
读卡器	5合1读卡器
集成摄像头	内置感光摄像头
笔记本芯片组	Intel 965PM
内存类型	DDR2
光驱类型	DVD刻录机
宽屏	支持
显卡芯片	nVidia Geforce 8400M GS
内置音箱	有
I/O接口	1个IEEE 1394端口，2个USB2.0端口，1个HDMI接口，1个5合1读卡器，1个VGA接口，1个S-Video接口，1个RJ-45接口，1个RJ-11，1个ExpressCard 54mm插槽，红外线端口，耳机、麦克风插孔和外接电源插孔
笔记本重量	2.4 Kg
预装操作系统	Windows Vista home premium
音频系统	内置音效芯片
显示屏尺寸	14.1英寸
显示屏描述	1280*800

1. Poweron-display below message,press Pause/break
1. <esc> to Enable startup message;
2. <F1> to system information=<F10>'s Tab1:Main;
3. <F9> to change Boot device order=<F10>'sTab3:System configuration;
4. <F2> to start check;
5. <F10> to BIOS setup option;
6. <F11> to system Recovery;
2. <esc>:to Enable startup message
• Phoenix Trusted core™ NB
• Copyright 1985-2006 Phoenix Technologies Ltd.
• All rights reserved
• BIOS version F.2E
• CPU=1 processors Detected cores per processor
• Intel® core™ 2 Duo CPU T7250 @ 2.00 GHz
• 1024M system RAM passed
• 2048 KB L2 Cache
• system Bios shadowed
• Video Bios shadowed
• ATAPI CD-ROM:HL-DT-ST.DVDRAM GSA-T20L
• Fixed Disk 0:SAMSUNG HM 160 HT
• Mouse initialized
3. <F2>:Biagnostics,to start check
1. Hard drive self test
2. Memory Test
4. <F9>:boot Menu,to change Boot device order
1. 1 ATAPI CD/DVD ROM Drive
2. 2 Notebook Hard Drive
3. <Enter Setup>

<F10>:to BIOS setup option;

1. Tab1:Main
• System:Time
• System:Date
• Notebook Model:HP Pavilion DV2000(GX905P)
• Product Number:GX905PA#AB2
• System Board ID:30CE
• Service ID:0000
• Process Type:Intel® Core™ Duo T7250
• Processor Speed:2000MHz
• Total Memory:1024 MB
• BIOS Version:F.2E
• Serial Number:2CD7440IVD
2. Tab2:Security
1. Administrator Password [clear]
2. Power-on Password [clear]
3. Tab3:System configuration
1. Button Sound [Enabled]
2. Virtualization Technology [Disabled]
3. Processor C4 state [enabled]
4. ▼Boot options
1. F10 and F12 Delay(sec) [0]
2. CD-ROM Boot [Enabled]
3. Floppy Boot [Enabled]
4. Internal Network Adaptor boot [disabled]
5. ▼Boot Order
1. USB Floppy
2. ATAPI CD/DVD Rom Drive
3. Notebook Hard Drive
4. USB Diskette on key
5. USB Hard Drive
6. Network Adaptor
4. Tab4:Diagnostics
1. Hard Drive Self Test
2. Memory Test
5. Tab5:Exit
6. <F8>:Advanced Boot Option

choose Advanced Options for en2 win7(OS name)
(use the arrow keys to highlight your choice)
safe mode	Start windows with only the core drivers and services,use when you cannot boot after installing a new driver or device.
safe mode with Networking	Start windows with core drivers,plus networking support
safe mode with Command Prompt	Start windows with core drivers,and launch the command prompt
Enabled Boot Logging	Creats ntbflog.txt,which lists all drivers all drivers that load during startup,including the last file to load before a failure.
Enable low-resolution mode(640*480)	set or reset the display resolution,start windows in low-resolution display mode(640*480)
Last know Good configuration(advanced)	start windows using settings from last successful boot attempt
Directory serices Restore Mode	start windows in directory services repair mode(for windows domain controllers only)
Debugging Mode	Enable windows kernel debugger
Disable automatic restart on	Prevent windows from automatically rebooting after a crash
Disable Driver signature	Allow drivers containing improper signatures to be loaded